Specialized frequency inverter /VSD/AC drive for injection machine

Input

Rated voltage；Frequency

HV1000-4T-xxxxx:380V～440V；50Hz/60Hz

HV1000-2Sxxxxx:200V～240V；50Hz/60Hz

Permissible fluctuation range

Continuous fluctuation range≤±10%,Short time fluctuation range≤-15%～+10%；

Voltage unbalance range≤3％；Frequency≤5％

Output

Rated voltage

HV1000-4T-xxxxx:0～380V/440V

HV1000-2Sxxxxx:0～200V/240V

Frequency

0Hz～650Hz

Over load ability

G type:150％rated current for 1 minute,180％rated current for 3s/1s(380V/220V series),200% rated current for 0.5s；

P type:120％ rated current for 1 minute

Control functions

Modulation mode

Flux vector PWM modulation

Speed range

1:100

Starting torque

180% rated torque at 0.5Hz

Accuracy of speed at steady state

≤±0.5％ rated synchronous speed

Torque boost

Auto torque boost,Manual torque boost

Acc/Dec curve

Linear,S curve；4 Acc/Dec time；

Unit(minute/second),60hours at most

Jog

Jog frequency: 0.10-60.00Hz: Acc/Dec time: 0.1-60.0s.

Jog interval adjustable

Multi-speed operation

Seven sections of frequency. Able to achieve through the built-in PLC or terminals.

Closed-loop control

Analog closed-loop,speed closed-loop control

Auto energy saving operation

Voltage output is optimized automatically according to the load condition to perform energy-saving operation.

Auto voltage regulation

Constant output voltage even if electric network voltage fluctuates

Auto current limiting

Operating current is limited automatically to avoid frequent tripping of the inverter

Auto carrier-wave regulation

Adjust the carrier frequency automatically according to the load characteristics；

Customized and operating functions

Traverse for textile motor

Traverse control, central traverse adjustable

Set length control

When reaching set length, the inverter will stop

Droop control

When many inverters control single load

Tone selection

Set the tone of the motor when it is running

Immunity to transient power failure

The inverter gives output even if power failure occurs

Channel binding

Command channel can bind with frequency. Setting channel and switched synchonizingly

Methods of inputting commands

Via keypad panel,terminals and serial port

Methods of setting up frequency

Digital setting,VCI,CCI,pulse setting,serial port

Auxiliary frequency

Flexible auxiliary frequency tuning,frequency synthesis

Pulse output terminal

0～50kHz pulse signal output . Signals can be reference frequency and output frequency

Analog output terminals

2 analog outputs of 0/4～20mA and 0～10V(selectable). Be able to output signals like reference frequency and output frequency.

Control panel

LED keypad

Able to show many parameters, such as: frequency setting, output frequency, output voltage, etc.

Keypad lock

Total lock or partially lock, in order to avoid misoperation

Protection function

Phase loss failure, Over/Under current, Over/Under voltage protection, Overheat and overload protection

Environment

Operating environment

In-door,

Altitude

Less than 1000m

Ambient temperature

-10℃～＋40℃,derating is required from 40～50℃；

Increase every 1 above 40℃, derating 2%, highest temperature allowed: 50℃

Humidity

Less than 95% RH,no condensing

Vibration

Less than5.9m/s²(0.6g)

Storage temperature

-40℃～＋70℃

Enclosure

Protection level

IP20

Cooling

Fan cooling

Mounting mode

Mounted in a cabinet